VIGA VGA+ video card Settings and Configuration

VISIONETICS INTERNATIONAL

VIGA VGA+

Card Type
Video card
Video Chip Set
Tseng Labs
Maximum Video Memory
1MB DRAM
Video Types Supported
XVGA
Highest Resolution Supported
1024 x 768
Data Bus
16-bit ISA
Formats Supported
NTSC, PAL

CONNECTIONS
Function
Label
Function
Label
Composite video out
J1
Composite video/RGB/sync out
P2
S-video out
J2
15-pin analog video port
P3

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
VGA enabled
S1/6
Off

VGA disabled
S1/6
On
»
Factory configured - do not alter
S1/7
Off
»
IRQ 9/2 enabled
S1/8
On

IRQ 9/2 disabled
S1/8
Off

DRAM CONFIGURATION
Size
Bank 0
1MB
(8) 256 x 4
Note:Location of memory bank is unidentified.

BASE I/O ADDRESS SELECTION
Setting
S1/1
S1/2
S1/3
S1/4
S1/5

200h
On
On
On
On
On

210h
On
On
On
On
Off

220h
On
On
On
Off
On
»
230h
On
On
On
Off
Off

240h
On
On
Off
On
On

3B0h
Off
Off
On
Off
Off

3C0h
Off
Off
Off
On
On

3D0h
Off
Off
Off
On
Off

3E0h
Off
Off
Off
Off
On

3F0h
Off
Off
Off
Off
Off
Note:
A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. S1/1 is the Most Significant Bit and switch S1/5 is the Least Significant Bit. The switches have the following decimal values: S1/5=16, S1/4=32, S1/3=64, S1/2=128, S1/1=256. Turn off the switches and add the values of the switches + 512, to obtain the correct memory address. (Off=1, On=0)

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

VIGA VGA+ video card Settings and Configuration

Search

My Books

Discover

Card Type	Video card
Video Chip Set	Tseng Labs
Maximum Video Memory	1MB DRAM
Video Types Supported	XVGA
Highest Resolution Supported	1024 x 768
Data Bus	16-bit ISA
Formats Supported	NTSC, PAL

CONNECTIONS
Function	Label	Function	Label
Composite video out	J1	Composite video/RGB/sync out	P2
S-video out	J2	15-pin analog video port	P3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	VGA enabled	S1/6	Off
	VGA disabled	S1/6	On
»	Factory configured - do not alter	S1/7	Off
»	IRQ 9/2 enabled	S1/8	On
	IRQ 9/2 disabled	S1/8	Off

DRAM CONFIGURATION
Size	Bank 0
1MB	(8) 256 x 4
Note:Location of memory bank is unidentified.

BASE I/O ADDRESS SELECTION
Setting		S1/1	S1/2	S1/3	S1/4	S1/5
	200h	On	On	On	On	On
	210h	On	On	On	On	Off
	220h	On	On	On	Off	On
»	230h	On	On	On	Off	Off
	240h	On	On	Off	On	On
	3B0h	Off	Off	On	Off	Off
	3C0h	Off	Off	Off	On	On
	3D0h	Off	Off	Off	On	Off
	3E0h	Off	Off	Off	Off	On
	3F0h	Off	Off	Off	Off	Off
Note: A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. S1/1 is the Most Significant Bit and switch S1/5 is the Least Significant Bit. The switches have the following decimal values: S1/5=16, S1/4=32, S1/3=64, S1/2=128, S1/1=256. Turn off the switches and add the values of the switches + 512, to obtain the correct memory address. (Off=1, On=0)