OKSORI CD-VISION PRO BOARD video card Settings and Configuration
TAN COMPUTER SYSTEM
OKSORI CD-VISION PRO BOARD
Category | MPEG 1 card |
Video Types Supported | XVGA |
Video Processor | Unidenitifed |
Highest Resolution Supported | 640 x 480 |
Data Bus Type | 16-bit ISA |
Memory Type | N/A |
Maximum Onboard Memory | N/A |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15-pin analog video port | CN1 | 9-pin NTSC Option board connector | CN7 |
VGA feature connector | CN2 | 9-pin NTSC Option board connector | CN8 |
Internal audio out | CN3 | 4-pin NTSC Option board connector | CN9 |
*Proprietary serial A/V interface | CN4 | External line out | J1 |
6-pin NTSC Option board connector | CN5 | *NTSC out | J2 |
9-pin NTSC Option board connector | CN6 | *NTSC out | J3 |
*Note: J2 & J3 are only used when the NTSC Option board is connected. CN4 is only used when the CD-Vision Option board is connected. | |||
DMA CHANNEL SELECTION | |||||
Channel | JP2/A | JP2/B | JP2/C | JP2/D | |
| » | 0 | Closed | Closed | Open | Open |
3 | Open | Open | Closed | Closed | |
INTERRUPT SELECTION | ||||
IRQ | JP2/E | JP2/F | JP2/G | |
| » | 5 | Closed | Open | Open |
10 | Open | Closed | Open | |
12 | Open | Open | Closed | |
OVERLAY I/O ADDRESS SELECTION | ||
Address | JPS1 | |
| » | 210h | Open |
310h | Closed | |
CD VISION I/O ADDRESS SELECTION |
Note: The exact address setting(s) of JPS2 is unidentified by the manufacturer. |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper | Position |
J4 | N/A |
My Books
