9000VL video card Settings and Configuration
SIXGRAPH COMPUTING LTD.
9000VL
Category | Video |
Video Types Supported | XVGA |
Video Processor | Weitek |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | VESA local bus |
Memory Type | VRAM |
Maximum Onboard Memory | 2MB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15 pin analog video port | CN1 | VESA Feature connector | CN2 |
BUS WIDTH SELECT | ||
Bus Width | SW1/1 | |
| » | 8-bit | On |
16-bit | Off | |
Note:If switch 1 is placed in the Off position, then switch 3 must be on. If switch 1 is on, then switch 3 must be in the Off position. | ||
VIDEO BIOS WIDTH CONFIGURATION | ||
Setting | SW1/2 | |
| » | 8 bit access | Off |
16-bit access | On | |
ZERO WAIT STATE SELECT | ||
Setting | SW1/4 | |
| » | Zero Wait State disabled | Off |
Zero Wait State enabled | On | |
VIDEO INTERRUPT SELECT | ||
IRQ9 | SW1/5 | |
| » | Enabled | On |
Disabled | Off | |
HIGH MEMORY BASE ADDRESS CONFIGURATION | |||
Address | SW1/6 | SW1/7 | |
| » | C0000000h | On | On |
D0000000h | On | Off | |
E0000000h | Off | On | |
F0000000h | Off | Off | |
FACTORY CONFIGURED SETTINGS | |
Switch | Setting |
SW1/8 | N/A |
Note:This switch is reserved for future use. | |
My Books
