MVGA-ALPINEPCI+ video card Settings and Configuration
PROLINK COMPUTER, INC.
MVGA-ALPINEPCI+
Category | Video/hard drive controller |
Video Types Supported | XVGA |
Video Processor | Cirrus Logic, Inc. |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | PCI |
Memory Type | DRAM |
Maximum Onboard Memory | 2MB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
VESA feature connector | CN1 | 40-pin IDE (AT) interface connector A | J1 |
15-pin analog video port | CN2 | 40-pin IDE (AT) interface connector B | J2 |
IDE daughter board connector | J3 | 2-pin connector - drive 0,1 active LED | JP1 |
2-pin connector - drive 2,3 active LED | JP15 | ||
IRQ9 | ||
Setting | JP3 | |
| » | Disabled | Open |
Enabled | Closed | |
DRAM CONFIGURATION | |||
Size | Bank 0 | Bank 1 | |
| » | 1MB | (2) 512K x 8 | None |
2MB | (2) 512K x 8 | (2) 512K x 8 | |
OPTIONAL IDE CONTROLLER DAUGHTER CARD
IDE INTERRUPT SELECT | |||||
IRQ | JP2 | JP4 | JP5 | JP6 | |
| » | INTA | Open | Open | Open | Closed |
INTB | Open | Open | Closed | Open | |
INTC | Open | Closed | Open | Open | |
INTD | Closed | Open | Open | Open | |
IDE PORTS | ||
Setting | JP12 | |
| » | Disabled | Pins 2 & 3 closed |
Enabled | Pins 1 & 2 closed | |
MISCELLANEOUS TECHNICAL NOTES |
The functions and settings of jumpers JP7-JP11, JP13 and JP14 are not specified in manufacturer’s documentation. |
My Books
