ULTRA CLIPPER GRAPHICS UA1024/V video card Settings and Configuration
PIXELWORKS, INC.
ULTRA CLIPPER GRAPHICS UA1024/V
Category | Video |
Video Types Supported | XVGA |
Video Processor | Pixelworks, Inc.(exact location unidentified) |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | 16-bit ISA |
Memory Type | DRAM |
Maximum Onboard Memory | 875KB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15-pin analog video port | CN1 | Daughterboard connector | CN3 & CN4 |
BASE I/O ADDRESS SELECTION | ||
» Address | WD | |
| » | 330h | Pins 1 & 2 closed |
| » | 340 | Pins 2 & 3 closed |
DMA SELECTION | |||
» Channel | WA | WB | |
| » | 6 | Pins 1 & 2 closed | Pins 1 & 2 closed |
| » | 5 | Pins 4 & 5 closed | Pins 4 & 5 closed |
| » | 7 | Pins 2 & 3 closed | Pins 2 & 3 closed |
INTERRUPT SELECTION | ||
» IRQ | WC | |
| » | 10 | Pins 1 & 2 closed |
| » | 11 | Pins 2 & 3 closed |
| » | 12 | Pins 4 & 5 closed |
MONITOR SYNC MODE SELECTION | |||
» Mode | SW1/3 | SW1/4 | |
| » | 3 | Off | Off |
| » | 4 | On | Off |
| » | 5 | On | On |
CGA EMULATION CONFIGURATION | |
Setting | SW1/1 |
Enabled | On |
Disabled | Off |
VGA PASS-THROUGH CONFIGURATION | |
Setting | SW1/2 |
Enabled | On |
Disabled | Off |
CONNECTIONS | |
Purpose | Location |
VGA pass-through port | CN2 |
MONITOR SYNC MODE SELECTION | |||||
» Mode | SW2/1 | SW2/2 | SW2/3 | SW2/4 | |
| » | 3 | On | On | Off | Off |
| » | 4 | On | Off | Off | Off |
| » | 5 | Off | Off | On | Off |
My Books
