TI-1210-8 REV. B video card Settings and Configuration
IMAGRAPH CORPORATION
TI-1210-8 REV. B
Category | Video |
Video Types Supported | XVGA |
Video Processor | Texas Instruments TMS34010 |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | 16-bit ISA |
Memory Type | Unidentified |
Maximum Onboard Memory | Unidentified |
CONNECTIONS | |
Purpose | Location |
15-pin analog video port | CN1 |
BASE I/O ADDRESS SELECTION | ||||||||
Address | J3 | J4 | J5 | J6 | J7 | J8 | J9 | J10 |
00000h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed |
01000h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open |
02000h | Open | Closed | Closed | Closed | Closed | Closed | Closed | Closed |
03000h | Open | Closed | Closed | Closed | Closed | Closed | Closed | Open |
04000h | Closed | Closed | Closed | Closed | Closed | Closed | Open | Closed |
FB000h | Open | Open | Open | Open | Open | Open | Closed | Open |
FC000h | Closed | Open | Open | Open | Open | Open | Open | Closed |
FD000h | Closed | Open | Open | Open | Open | Open | Open | Open |
FE000h | Open | Open | Open | Open | Open | Open | Open | Closed |
FF000h | Open | Open | Open | Open | Open | Open | Open | Open |
Note: A total of 255 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Jumper J4 is the Most Significant Bit and jumper J10 is the Least Significant Bit. The jumpers have the following decimal values: jumper J4=524288, J5=262144, J6=131072, J7=65536, J8=32768, J9=16384, J3=8192, J10=4096. Open the jumpers and add the values of the open jumpers to obtain the correct memory address. (open=1, closed=0) | ||||||||
EMULATION CONFIGURATION | |
Setting | JP10 |
Enabled | Open |
Disabled | Closed |
INTERRUPT SELECTION | |||||
| IRQ | JP12 | JP13 | JP14 | JP15 | |
| » | Disabled | Open | Open | Open | Open |
| 2/9 | Open | Pins 1 & 2 closed | Open | Open | |
| 6 | Open | Pins 2 & 3 closed | Open | Open | |
| 7 | Pins 2 & 3 closed | Open | Open | Open | |
| 10 | Open | Open | Open | Pins 2 & 3 closed | |
| 11 | Open | Open | Open | Pins 1 & 2 closed | |
| 12 | Open | Open | Pins 1 & 2 closed | Open | |
| 14 | Pins 1 & 2 closed | Open | Open | Open | |
| 15 | Open | Open | Pins 2 & 3 closed | Open | |
DIRECT ACCESS ADDRESS SELECTION | ||||||
Address | JP3 | JP4 | JP5 | JP6 | JP7 | JP8 |
00000h | Closed | Closed | Closed | Closed | Closed | Closed |
04000h | Closed | Closed | Closed | Open | Closed | Closed |
08000h | Closed | Closed | Closed | Closed | Open | Closed |
0C000h | Closed | Closed | Closed | Open | Open | Closed |
10000h | Closed | Closed | Closed | Closed | Closed | Open |
EC000h | Open | Open | Open | Open | Open | Closed |
F0000h | Open | Open | Open | Closed | Closed | Open |
F4000h | Open | Open | Open | Open | Closed | Open |
F8000h | Open | Open | Open | Closed | Open | Open |
FC000h | Open | Open | Open | Open | Open | Open |
Note: A total of 63 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Jumper JP3 is the Most Significant Bit and jumper JP6 is the Least Significant Bit. The jumpers have the following decimal values: jumper JP3=524288, JP4=262144, JP5=131072, JP8=65536, JP7=32768, JP6=16384. Open the jumpers and add the values of the open jumpers to obtain the correct memory address. (open=1, closed=0) | ||||||
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper | Position |
JP1 | Unidentified |
JP2 | Unidentified |
JP11 | Unidentified |
P1 | N/A |
P7 | Unidentified |
Note: Exact location of jumpers unidentified. | |
My Books
