DT-911S video card Settings and Configuration

Category	Video
Video Types Supported	XVGA
Video Processor	S3 86C911
Highest Resolution Supported	1024 X 768
Data Bus Type	16-bit ISA
Memory Type	VRAM
Maximum Onboard Memory	1024KB

CONNECTIONS
Purpose	Location
15-pin analog video port	J1

VIDEO MEMORY SPEED SELECTION
Speed	JP3
100ns	Pins 1 & 2 closed
80ns	Pins 2 & 3 closed

INTERRUPT SELECTION
IRQ 2/9		JP8
»	Disabled	Open
	Enabled	Pins 11 & 12 closed

MONITOR TYPE SELECTION
Type	Rate	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
Basic VGA, 2A, 3D, 4D, 5D	60Hz	On	Off	On	Off	On	Off
NEC 3D, 4D, 5D	70Hz	On	Off	On	Off	Off	On
NEC 3D, 4D, 5D	60Hz	On	Off	Off	On	On	Off
NEC 4D, 5D	70Hz	On	On	Off	On	Off	On
2A, 3D	56Hz	Off	On	On	Off	On	Off
2A, 3D	43Hz	Off	On	On	Off	Off	On
4D, 5D	60Hz	Off	On	Off	On	On	Off
5D	70Hz	Off	On	Off	On	Off	On

FACTORY CONFIGURED - DO NOT ALTER
Jumper	Position
JP2	Pins 2 & 3 closed
JP4	Pins 2 & 3 closed
JP5	Pins 2 & 3 closed
JP6	Pins 1 & 2 closed
JP7	Pins 1 & 2 closed

VRAM CONFIGURATION
Size	Bank 0	Bank 1	JP1
512KB	(4) 256K x 4 VRAM	NONE	Pins 2 & 3 closed
1024KB	(4) 256K x 4	(4) 256K x 4	Pins 1 & 2 closed