PLEXTOR
PX-R412CSE
Device Type | External CD Recorder/Reader |
Interface | SCSI |
Spin Rate (Read/Write) | 1X, 2X, 4X, 8X 12X (Read) / 1X, 2X, 4x (Write) |
Formats Supported Read | CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, Red & Yellow Book, CD-Plus, CD-Extra |
Formats Supported Write | CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, Red & Yellow Book, CD-Plus, Enhanced CD, CD+G, CD-Midi, CD-Text |
View | Top |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
Audio line out - left | CN1 | Audio line out - right | CN2 |
DRIVE SELECT ID |
To set the SCSI ID, turn the dial on SW2 to the SCSI ID number that you would like to select. The default SCSI ID setting is 4. |
USER CONFIGURABLE SETTINGS | ||
Setting | Label | Position |
í Parity check enabled | SW1/1 | On |
Parity check disabled | SW1/1 | Off |
í Termination enabled | SW1/2 | On |
Termination disabled | SW1/2 | Off |
í Factory configured - do not alter | SW1/3 | Off |
í Block mode disabled | SW1/4 | Off |
Block mode enabled | SW1/4 | On |
í Flash upgrade disabled | SW1/5 | Off |
Flash upgrade enabled | SW1/5 | On |
CONNECTIONS | ||
Function | Label | |
Headphone jack | CN3 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Orange | On | Recording at 1X |
LED1 | Orange | Off | Recording at 2X or not recording at all |
LED2 | Orange | On | Recording at 2X |
LED2 | Orange | Off | Recording at 1X or not recording at all |
LED3 | Green | On | Power is on and no disc is loaded in drive |
LED3 | Green | Blinking | Disc is being accessed by drive |
LED4 | Green | On | Power is on and disc is loaded in drive |
LED4 | Green | Off | Power is off |
Note: When drive is recording at 4X, both LED1 and LED2 will be on at the same time. |