PE3-10B2 Network Card Settings and Configuration
XIRCOM
PE3-10B2
Card Type | Ethernet |
Data Bus | Parallel |
Maximum network Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Parallel port | CN1 | DC power port | CN3 |
RG-58A/U 50ohm coaxial | CN2 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Power is on |
LED1 | Red | On | Network connection is broken |
LED1 | Red | Blinking | Network collision has been detected |
LED1 | Green/Red | Off | Power is off |
LED2 | Green | Blinking | Data is being transmitted |
LED2 | Green | Off | Data is not being transmitted |
My Books
