PACKARD BELL

286X PWB-2149 REL.01 (FORCE 1/AXCEL 1+/

PB286N/LEGEND IV/PACK-MATE III)

Processor	80286
Processor Speed	12/16MHz
Chip Set	TI
Max. Onboard DRAM	4MB
Cache	None
BIOS	Phoenix
Dimensions	330mm x 218mm
I/O Options	Parallel port, serial ports (2), PS/2 mouse port, floppy drive interface, IDE interface
NPU Options	80287

CONNECTIONS
Purpose	Location	Purpose	Location
Parallel port	J1	Reset switch	J11 pin 1
Serial port (COM2)	J2	Turbo switch	J11 pin 2
Serial port (COM1)	J3	Power ready	J11 pin 3
PS/2 mouse port	J4	IDE LED	J11 pin 4
Keyboard	J5	Turbo LED	J11 pin 5
Expansion slot card	J8	Ground	J11 pin 6
IDE interface	J9	External battery	J12
Floppy interface	J10	Keylock	J20

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	COM1 (J3) enabled	J7	pins 1 & 2 closed
	COM1 (J3) disabled	J7	pins 1 & 2 open
»	COM2 (J2) enabled	J7	pins 3 & 4 closed
	COM2 (J2) disabled	J7	pins 3 & 4 open
»	DRAM select 0 wait states	J14	Closed
	DRAM select 1 wait state	J14	Open
»	DRAM module type select 256K x 9	J15	Closed
	DRAM module type select 1M x 9	J15	Open
»	384KB relocation enabled	J16	Open
	384KB relocation disabled	J16	Closed
»	Floppy interface enabled	J21	Closed
	Floppy interface disabled	J21	Open
»	Monitor type select color	J22	Closed
	Monitor type select monochrome	J22	Open
»	IDE interface enabled	J23	Closed
	IDE interface disabled	J23	Open

DRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(2) 256K x 9	(2) 256K x 9
2MB	(2) 1M x 9	NONE
4MB	(2) 1M x 9	(2) 1M x 9

PARALLEL PORT IRQ CONFIGURATION
IRQ	J17	J18
LPT1 at IRQ7	pins 1 & 2 closed	pins 2 & 3 closed
LPT2 at IRQ5	pins 2 & 3 closed	pins 1 & 2 closed

Share and Enjoy

Tags

286X PWB-2149 REL.01 (FORCE 1/AXCEL 1+/, motherboard, processor, socket, pentium, pentium pro, celeron, powerpc, alpha, 8088, 8086, 286, 386, 486, configuration, RAM, DRAM, floppy, jumper, connections