ERGOPRO D5 P-SERIES Motherboard Settings and Configuration

Processor	Pentium
Processor Speed	90MHz
Chip Set	OPTI
Max. Onboard DRAM	128MB
Cache	512KB
BIOS	ICL
Dimensions	330mm x 218mm
I/O Options	PS/2 mouse port, parallel port, serial ports (2), VGA port, floppy drive interface, IDE interface, riser slots (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
VGA port	CN1	Floppy drive interface	CN8
Parallel port	CN2	IDE interface LED	J1
Serial port 2	CN3	Chassis fan power	J2
Serial port 1	CN4	Front panel connector	J3
PS/2 mouse port	CN5	Chassis fan power	J4
IDE interface	CN7	Riser Card	SL1 & SL2

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	CMOS memory normal operation	JP1	pins 3 & 4 closed
	CMOS memory clear	JP1	pins 5 & 6 closed
»	System lock disabled	JP1	pins 11 & 12 closed
	System lock enabled	JP1	pins 9 & 10 closed
»	Boot block BL RE normal operation	JP1	pins 13 & 14 open
	Boot block BL RE reload enabled	JP1	pins 13 & 14 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	NONE
16MB	(2) 1M x 36	(2) 1M x 36
16MB	(2) 2M x 36	NONE
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 2M x 36	(2) 2M x 36
32MB	(2) 4M x 36	NONE
40MB	(2) 1M x 36	(2) 4M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 4M x 36	(2) 4M x 36
64MB	(2) 8M x 36	NONE
72MB	(2) 1M x 36	(2) 8M x 36
80MB	(2) 2M x 36	(2) 8M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36

CACHE CONFIGURATION
Size	Bank 0
512KB	(16) 32K x 8
Note:Cache is factory installed and is not configurable.

CPU SPEED CONFIGURATION
Speed	JP1
90MHz	pins 7 & 8 open