PRACTICAL PERIPHERALS, INC.
PM9600SA V.32 MODEM
Modem Type | Data (synchronous/asynchronous)/Fax |
Maximum Data Rate | 9600bps |
Maximum Fax Rate | 9600bps |
Data Bus | External |
Fax Class | Class I & II |
Data Modulation Protocol | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32 |
Fax Modulation Protocol | V.27ter, V.29 |
Error Correction/Compression | MNP2-5, V.42, V.42bis |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Line in | CN1 | RS-232 | CN4 |
Line out | CN2 | Answer switch | SW1 |
DC power | CN3 | Power switch | SW2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
DC | Red | On | Data compression is enabled |
DC | Red | Off | Data compression is disabled |
EC | Yellow | On | MNP5 connection has been made |
EC | Green | On | V.42 connection has been made |
EC | Red | On | Buffered asynchronous connection has been made |
EC | N/A | Off | Non-buffered asynchronous connection has been made |
HS | Yellow | On | Modem is operating at 4800bps or faster |
HS | Green | On | Modem is operating at 2400bps |
HS | Red | On | Modem is operating at 1200bps |
HS | N/A | Off | Modem is operating at 300bps |
AA | Red | On | Auto-answer enabled |
AA | Red | Off | Auto-answer disabled |
AA | Red | Blinking | Line is ringing |
CD | Red | On | CD signal is high |
CD | Red | Off | CD signal is low |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
RX | Red | On | Modem is receiving data |
RX | Red | Off | Modem is not receiving data |
TX | Red | On | Modem is transmitting data |
TX | Red | Off | Modem is not transmitting data |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
MR | Red | On | Power is on |
MR | Red | Off | Power is off |