PRACTICAL PERIPHERALS, INC.
PC288T2/PC288T2-EZ/MC288T2/MC288T2-EZ
Modem Type | Data (synchronous/asynchronous)/Fax/Voice |
Maximum Data Rate | 28.8Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | External |
Fax Class | Class I & II |
Data Modulation Protocol | Bell 103A/212A CCITT V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation Protocol | V.17, CCITT V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP2-5, V.42, V.42bis |
CONNECTIONS | |
Purpose | Location |
Line out | CN1 |
Proprietary Command Set
CALLER ID | |
Type: | Configuration |
Format: | AT [cmds] %CCID=n [cmds] |
Example: | AT %CCID2 <CR> |
Description: | Controls the Caller ID function. |
Command | Function |
» %CCID=0 | Caller ID disabled. |
%CCID=1 | Caller ID displays formatted data. |
%CCID=2 | Caller ID displays raw hexadecimal data. |
CLOCK DOUBLER | |
Type: | Configuration |
Format: | AT [cmds] %BAUD=n [cmds] |
Example: | AT %BAUD1 <CR> |
Description: | Doubles the local serial port speed. |
Command | Function |
» %BAUD=0 | Clock doubler disabled. |
%BAUD=1 | Clock doubler enabled. |
DISTINCTIVE RING | |||
Format | AT [cmds] S101=n [cmds] | ||
Example: | ATS101=40 <CR> | ||
Default: | 0 | ||
Range: | 0 - 255 | ||
Unit: | Bit-mapped | ||
Description: | |||
Bit | Value | Function | |
0 | » 0 1 | Do not respond to ring type A. Respond to ring type A. | |
1 | 0 | Not used. | |
2 | » 0 1 | Do not respond to ring type C. Respond to ring type C. | |
3 | » 0 1 | Do not respond to ring type D. Respond to ring type D. | |
4 | » 0 1 | Do not respond to ring type E. Respond to ring type E. | |
5 | 0 | Not used. | |
6 | » 0 1 | Do not respond to ring type G. Respond to ring type G. | |
7 | » 0 1 | Report RING for all ring types. Report RING n where n is the ring type. |