285/285S modem/telephone/ISDN Settings and Configuration
PATTON ELECTRONICS COMPANY
285/285S
Card Type | Short Range Modem |
Chip Set | Unidentified |
I/O Options | 25-pin serial port (RS-232), network interface via RJ-45 (RJ-11 optional) terminal block |
Wiring Type | Unshielded twisted pair |
Maximum Data Rate | 115.2Kbps |
Data Bus | External |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
DTE/DCE serial port (25-pin connector) | CN1 | Twisted pair connection terminal blocks | CN2 | |||
USER CONFIGURABLE SETTINGS | ||
Setting | Label | Position |
8msec RTS/CTS delay | SW1/1 | On |
No RTS/CTS delay | SW1/1 | Off |
Echo enabled | SW1/2 | On |
Echo disabled | SW1/2 | Off |
Carrier controlled by RTS | SW1/3 | On |
Carrier forced high | SW1/3 | Off |
Low line impedance (120Ohm) | SW1/4 | On |
High line impedance (120K Ohm) | SW1/4 | Off |
4 wire (full duplex mode) | SW2 | On |
2 wire (half duplex mode) | SW2 | Off |
DTE mode | SW3 | On |
DCE mode | SW3 | Off |
MISCELLANEOUS TECHNICAL NOTES |
Patton Electronics model 285S is the surge protected version of model 285 |
My Books
