MOTOROLA, INC.
6520/6560 MPROUTER DSPM/E&M CARD
Card Type | Telephony |
Chip Set | Unidentified |
I/O Options | Telephone in/out (2), MVIP bus |
Data Bus | 16-bit ISA |
Line Type | E & M |
CONNECTIONS | |||
Function | Label | Function | Label |
Line 1 | CN1 | MVIP bus (not used) | CN3 |
Line 2 | CN2 | 48V DC power in | CN4 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Line 1 complex impedance type set for German operation | J13 | Pins 1 & 2 closed |
Line 1 complex impedance type set for UK operation | J13 | Pins 2 & 3 closed | |
» | Line 2 complex impedance type set for German operation | J23 | Pins 1 & 2 closed |
Line 2 complex impedance type set for UK operation | J23 | Pins 2 & 3 closed |
MVIP BUS TERMINATION (NOT USED) | |||
Setting | W1 | W2 | |
» | Not terminated | Open | Open |
Terminated | Closed | Closed |
LINE 1 IMPEDANCE TYPE | |||
Setting | J11 | J14 | |
» | Simple 600 ohm impedance | Pins 1 & 2 closed | Pins 2 & 3 closed |
Complex impedance | Pins 2 & 3 closed | Pins 1 & 2 closed |
LINE 2 IMPEDANCE TYPE | |||
Setting | J21 | J24 | |
» | Simple 600 ohm impedance | Pins 1 & 2 closed | Pins 2 & 3 closed |
Complex impedance | Pins 2 & 3 closed | Pins 1 & 2 closed |
LINE 1 TYPE | |||
Setting | J12 | J15 | |
» | Four-wire | Pins 1 & 2 closed | Open |
Two-wire | Pins 2 & 3 closed | Closed |
LINE 2 TYPE | |||
Setting | J22 | J25 | |
» | Four-wire | Pins 1 & 2 closed | Open |
Two-wire | Pins 2 & 3 closed | Closed |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Line 1 local connection is off hook |
LED1 | Green | Off | Line 1 local connection is on hook |
LED2 | Green | On | Line 1 remote connection is off hook |
LED2 | Green | Off | Line 1 remote connection is on hook |
LED3 | Green | On | Line 2 local connection is off hook |
LED3 | Green | Off | Line 2 local connection is on hook |
LED4 | Green | On | Line 2 remote connection is off hook |
LED4 | Green | Off | Line 2 remote connection is on hook |
MISCELLANEOUS TECHNICAL NOTE |
This card is designed for use in Motorola’s 6520/6560 MPRouter system and will not function in another system. See documents M3596 and M3597 for more information. |
CONNECTIONS | |||
Function | Label | Function | Label |
Connector to computer power supply | CN1 | Status connector | CN3 |
Connector to computer power supply | CN2 | 48V DC power out | CN4 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Ring generation enabled | JP1 | Pins 2 & 3 closed |
Ring generation disabled | JP1 | Pins 1 & 2 closed | |
» | Ring frequency set to 25Hz | JP2 | Pins 2 & 3 closed |
Ring frequency set to 50Hz | JP2 | Pins 1 & 2 closed |
MISCELLANEOUS TECHNICAL NOTE |
This power supply can power up to six DSPM/E&M cards via an included multi-connector cable. |