LASAT COMMUNICATIONS A/S
UNIQUE SAFIRE 288
Card Type | Modem (synchronous/asynchronous) |
Chipset | Unidentified |
Maximum Data Rate | 28.8Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation | Unidentified |
Error Correction/Compression | MNP5, MNP10, V.42, V.42bis |
Fax Class | Class I & II |
Data Bus | Serial |
CONNECTIONS | |||
Function | Label | Function | Label |
Power connector | CN1 | Telephone in | CN3 |
RS-232/422 | CN2 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
ON | Red | On | Power is on |
ON | Red | Off | Power is off |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
DCD | Red | On | Carrier signal detected |
DCD | Red | Off | Carrier signal not detected |
DCD | Red | Blinking | Phone is ringing |
COMP | Red | On | Modem is connected with data compression |
COMP | Red | Off | Modem is not connected with data compression |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \J, \K, \L, \N |
%C, %E, %L, %Q |
Special AT Commands |
:E, *H, -K, )M, @M, +MS, -Q |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S16, S18, S24, S25, S26, S29, S30, S31 |
S32, S33, S36, S38, S39, S46, S48, S82, S86, S91, S92, S95, S201 |
Note: See MHI help file for complete information. |
UNIDENTIFIED COMMANDS | |
Command | Default |
S14 | Unidentified |
S21 | Unidentified |
S22 | Unidentified |
S23 | Unidentified |
S27 | Unidentified |
S28 | Unidentified |
S37 | Unidentified |
S40 | Unidentified |
S41 | Unidentified |
Proprietary AT Command Set
See LASAT COMMUNICATIONS A/S CREDIT 288 for a full command summary.