LANTECH COMPUTER COMPANY
MULTI-FUNCTION 28.8KBPS PCMCIA LAN + FAX/MODEM
Card Type | Fax, Modem (asynchronous), Network Interface Card |
Chip Set | Unidentified |
I/O Options | Ethernet 10BaseT connector |
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Maximum Modem Rate | 28.8Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | PCMCIA Type II |
Fax Class | Class I & II |
Data Modulation Protocol | Bell 103, Bell 212A/B ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation Protocol | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Boot ROM | Not available |
V2325
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, ‘Comma’, A/ |
A, B, C, D, E, H, M, N, O, P, Q, S, T, V, X, Y, Z |
&C, &D, &F, &G, &P, &S, &T, &V, &W |
Extended AT Commands |
\K, \N, %E, %Q |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S25, S26, S29, S30, S32 |
S33, S37, S38 |
Note: See MHI Help file for full command documentation. |
Proprietary AT Command Set
MODULATION SELECTION | ||
Type: | Configuration | |
Format: | AT [cmds] Fn [cmds] | |
Description: | Controls which modulation the modem uses to connect with | |
Command | Function | |
F0 | Auto-detect mode, same as ATN1 |
REPORT INFORMATION | |
Type: | Immediate |
Format: | AT [cmds] In [cmds] |
Description: | Displays information requested |
Command | Function |
I0 | Reports product code |
SLEEP TIMER | |
Type: | Register |
Format | AT [cmds] S24=n [cmds] |
Default: | Unidentified |
Range: | 0-255 |
Unit: | 1 second |
Description: | Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode. |