SUN-6334/1 (EX-4002) IO card Settings and Configuration

Card Type	Parallel card
Chip Set	ST-78C34
Maximum Onboard Memory	None
I/O Options	Parallel port
Data Bus	16-bit ISA
Floppy drives supported	None

CONNECTIONS
Function	Location
25-pin parallel port 1	P1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP3	5 & 6 closed
»	Factory configured - do not alter	JP4	5 & 6 closed
Note: JP3 & JP4 are set for the DMA selection but are not used in this card.

PARALLEL PORT 1 ADDRESS SELECTION
LPT		JP1/1	JP1/2	JP1/3	JP1/4	JP1/5	JP1/6
»	LPT1(3BCh)	Closed	Open	Open	Open	Open	Open
	LPT2(378h)	Open	Closed	Open	Open	Open	Open
	LPT3(278h)	Open	Open	Closed	Open	Open	Open
	LPT4(268h)	Open	Open	Open	Closed	Open	Open
	LPT5(27Ch)	Open	Open	Open	Open	Closed	Open
	LPT6(26Ch)	Open	Open	Open	Open	Open	Closed

PARALLEL PORT 1 INTERRUPT SELECTION
IRQ		JP2/A	JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	JP2/G	JP2/H	JP2/I
	IRQ3	Closed	Open	Open	Open	Open	Open	Open	Open	Open
	IRQ4	Open	Closed	Open	Open	Open	Open	Open	Open	Open
	IRQ5	Open	Open	Closed	Open	Open	Open	Open	Open	Open
»	IRQ7	Open	Open	Open	Closed	Open	Open	Open	Open	Open
	IRQ9	Open	Open	Open	Open	Closed	Open	Open	Open	Open
	IRQ10	Open	Open	Open	Open	Open	Closed	Open	Open	Open
	IRQ11	Open	Open	Open	Open	Open	Open	Closed	Open	Open
	IRQ12	Open	Open	Open	Open	Open	Open	Open	Closed	Open
	IRQ15	Open	Open	Open	Open	Open	Open	Open	Open	Closed