SST-2I MULTIPORT BOARD IO card Settings and Configuration

Card Type	Multi-I/O card
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Serial ports (2 RS-232)
Hard Drives supported	None
Floppy drives supported	None
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
9-pin serial port 2	CN1	9-pin serial port 1	CN2

USER CONFIGURABLE SETTINGS
Function	Label	Position
Plug and play enabled	JP1	Pins 1 & 2 closed
Plug and play disabled	JP1	Pins 2 & 3 closed
Note: When plug and play is enabled SW/1 is disabled

BASE I/O ADDRESS SELECTION
Setting		SW1/1	SW1/2	SW1/3	SW1/4
	200h	Off	Off	Off	Off
	220h	On	Off	Off	Off
»	240h	Off	On	Off	Off
	260h	On	On	Off	Off
	280h	Off	Off	On	Off
	2A0h	On	Off	On	Off
	2C0h	Off	On	On	Off
	2E0h	On	On	On	Off
	300h	Off	Off	Off	On
	320h	On	Off	Off	On
	340h	Off	On	Off	On
	360h	On	On	Off	On
	380h	Off	Off	On	On
	3A0h	On	Off	On	On
	3C0h	Off	On	On	On
	3E0h	On	On	On	On