 |
 |
Articles / TULARC / PC info / Hard Drives / TEAC Hard Drives / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
Hard Drive: TEAC: SD-340-04 43MB 3.5"/SL SCSI1 SE |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
S D - 3 4 0 - 0 4 TEAC
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 1050| | |
Capacity form/unform 43/ MB Heads 2| | |
Seek time / track 23.0/10.0 ms Sector/track 40| | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 28 KB Landing Zone
Data transfer rate 1.000 MB/S int Bytes/Sector 512
2.000 MB/S ext
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 50 | -40 60
Power: sleep W Humidity % 8 80 | 8 80
standby W Altitude km -0.300 3.000| -0.300 12.000
idle W Shock g 5 | 70
seek W Rotation RPM 2358
read/write W Acoustic dBA 45
spin-up W ECC Bit
MTBF h 30000
Warranty Month
Lift/Lock/Park - Certificates CSA,TUV,UL478
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
S0 S3
+ +------+ +
| ----+-------------------------------+------+------+-+-------+- |
| |:::::::::::::::::::::::::::::::::::::::::::::| |XXXXXXX| |
| +1--------------------------------------------+ +Power--+ |
| Signal Connector |
+------- -------+
| |
+------------------------------------------------------------------+
+------------------------------------------------------------------+ | | | | | | | +-+Indicator LED | | +-+ | +------------------------------------------------------------------+
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Jumper Setting
==============
SCSI ID
-------
S0, S1, S2 shorted SCSI ID = 0 (Factory setting)
Parity check
------------
S3 shorted Execution of parity check (Factory setting)
Terminator factory setting: Equipped
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Notes on installation
=====================
Drive mounting
--------------
horizontally vertically
+-----------------+ +--+ +--+ +------------------+
| | | +-----+ +-----+ | | | x
| | | | | | | | x+----------------+x
+-+-----------------+-+ | | | | | | ||x x||
+---------------------+ | | | | | | || x x ||
| | | | | | || x x ||
x x | | | | | | || x x ||
+------x------x-------+ | +-----+ +-----+ | || xx ||
+-+------x--x-------+-+ +--+ +--+ || x x ||
| xx | || x x ||
| x x | || x x ||
+---x--------x----+ |x x|
x x x++----------------++x
UNACCEPTABLE! UNACCEPTABLE!
Note: Any direction of installation other than above should be de-
termined spearately by arrangement.
Mounting Holes
--------------
10-M3 tapped holes for installation (Bottom x4, each side x 3).
Front Bezel
-----------
Black, Part No. 16145890-00
LED Indicator
-------------
Green
Power Interface Connectors
--------------------------
HDD Side Connector AMP P/N 171826-4 (natural color)
or equivalent
Number of pins 4
Prevention method for mis-connection Mechanical protection of the
shape of the connector housing
Cable side matched connector AMP P/N 171822-4 (natural color)
or equivalent
Matched pin AMP P/N 170204-2 (AWG 20 26,
loose piece) or P/N 170262-2
(AWG 20 to 26, chained form),
or equivalent
Power cable The maximum power consumption of
the HDD and the voltage at the
power connector shall be taken
into consideration.
TEAC SD-340-04 SPECIFICATION P/N 10530487-00
Seek Time
---------
+----------------------------------+--------+
| | 340-04 |
+----------------------------------+--------+
|Track-to-Track msec. typ. | 10 |
+----------------------------------+--------+
|Average msec. typ. | 23 |
| msec. max. | 50 |
+----------------------------------+--------+
|Latency msec. avg. | 12.7 |
+----------------------------------+--------+
Interleave
----------
1:1 (fixed)
Data buffer
-----------
28,672 Bytes (512 x 56)
Safety standards
----------------
(applied to the model P/N 19307371-XX only)
UL approved (standard UL478)
CSA approved (standard C22.2 No. 220)
T V approved (standard VDE0806/IEC380)
International CSA approved (standard IEC380/IEC435)
|
|
|
|
 |
|