D K 5 1 4 S - 3 8 D HITACHI
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 5.25"/FH Cylinders 903| | |
Capacity form/unform 330/ 382 MB Heads 14| | |
Seek time / track 16.0/ 4.0 ms Sector/track 51| | |
Controller ESMD Precompensation
Cache/Buffer 24 KB FIFO BUFFER Landing Zone
Data transfer rate 1.772 MB/S int Bytes/Sector 512
MB/S ext
Recording method RLL 2/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 45 | -20 50
Power: sleep W Humidity % 8 80 | 8 90
standby W Altitude km |
idle W Shock g 2 | 20
seek W Rotation RPM 3600
read/write W Acoustic dBA
spin-up W ECC Bit 48
MTBF h 30000
Warranty Month
Lift/Lock/Park YES Certificates
Layout
HITACHI DK514S-38D/38S JUMPER SETTING
+-------------------+ +--+ +--+
| +------+ xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +-+
| XXXXXXXX +-------------------------------+ |
+--+ J5 Bytes per sector |
|XXX 15++++++++ |
|XXX ++++++++2 |
|XXXJ4 JP161 11+++++++ Drive |
|XXX ++++++2 address/|
|XXX JP174 TAG4/5 |
|xxxJ6 Select |
+--+xxx REV. 0 |
| SZ906 |
| |
| |
| Bytes per sector |
| JP287 xx +--+
|PCB REV. 15+++++++++1 XX |
| A/K +-----+ +---+ ++++++++2 J3XX |
+-------+ +--------------+ +------------------------------+
+-------------------+ +--+ +--+
| +------+ xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +-+
| XXXXXXXX +-------------------------------+ |
+--+ J5 XXX|
|XXX 15++++++++ XXX|
|XXX ++++++++2 XXX|
|XXXJ4 JP167 11+++++++ XXX|
|XXX ++++++2 XXX|
|XXX JP179 J1XXX|
|xxxJ6 XXX|
+--+xxx SZ906 REV. 0 OR MORE XXX|
| XXX|
| 1-2 XXX|
| Bytes per | | |
| Sector | |JP299 |
| 13|-14 xx +--+
|PCB REV. | | XX |
| A/K1B +-----+ +---+ +-+ J3XX |
+-------+ +--------------+ +------------------------------+
+----------------------------------------+
| XXXXXXXXX J12 JP7+1 |
+------------------+ ++ |
| +--1 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
| 4--+JP38 J21 |
| XXXXXXXXXXXXXXXXXXXXX |
| J2 |
|+---+ +--------+ |
||MR | PCB REV. 0 | MR5 | |
||40 | +--------+ +--------++--------+ |
|+---+ | MR26 | | MR19 | |
|PCB REV. +--------+ +--------+ |
|A/B XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
+-------------------------J1--------------------------------+
+----------------------------------------+
| +1 |
+---------------JP37 ++JP9 |
| XXXXXXXXXXJ12+--1 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
| 4--+ J21 |
| XXXXXXXXXXXXXXXXXXXXX |
| J2 |
|+---+ +--------+ |
||MR | PCB REV. 1 OR MORE | MR7 | |
||42 | +--------+ +--------++--------+ |
|+---+ | MR30 | | MR22 | |
|PCB REV. +--------+ +--------+ |
|A/C1 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX |
+-------------------------J1--------------------------------+
SZ240: Signal port PCB
J1 : Control Cable Connector
J2 : Data Cable Connector
J12: Panel Cable Connector
J21: Internal Cable Connector
+-----------------P12-----------P2------------P1----------+
| XXXXXXXX XXXXXXXXXXXX XXXXXXXXXXX |
| JP48 |
|XXX 15+++++++++1 |
|XXX 16+++++++++2 XXX |
|XXX XXX XXX|
|XXX XXX XXX XXX XXX|
|XXX J21 REV. 0 XXX XXX J2XXX XXX|
|XXX J5XXX XXX XXX XXXJ1
|XXX XXX XXX XXX XXX|
| XXX XXX XXX XXX|
| XXX XXX|
| XXX XXX|
| 1--2 XXX XXX|
| | | XXXJ4 XXX|
| | |JP85 |
| JP87 | | |
| 1xxxx3 +--+16 A/EA (PCB) |
+---------------------------------------------------------+
SZ241 : Dual port PCB
J1 : Channel A Control Cable Connector
J2 : Channel A Data Cable Connector
J4 : Channel B Control Cable Connector
J5 : Channel B Data Cable Connector
J21: Internal Cable Connector
P12: Panel Cable Connector
P1/P2 Not Used
+-----------------P12-------------------------------------+
| XXXXXXXX |
| JP48 |
|XXX 15+++++++++1 |
|XXX 16+++++++++2 XXX |
|XXX XXX XXX|
|XXX XXX XXX XXX XXX|
|XXX J21 REV. 1 OR MORE XXX XXX J2XXX XXX|
|XXX J5XXX XXX XXX XXXJ1
|XXX XXX XXX XXX XXX|
| XXX XXX XXX XXX|
| XXX XXX|
| XXX XXX|
| 1--2 XXX XXX|
| | | XXXJ4 XXX|
| | |JP85 |
| JP87 | | |
| 1xxxx3 +--+16 A/F1 (PCB) |
+---------------------------------------------------------+
SZ241 : Dual port PCB
J1 : Channel A Control Cable Connector
J2 : Channel A Data Cable Connector
J4 : Channel B Control Cable Connector
J5 : Channel B Data Cable Connector
J21: Internal Cable Connector
P12: Panel Cable Connector
Jumpers
HITACHI DK514S-38S/38D JUMPER SETTING
Jumper Setting
==============
Installing Terminator Module
----------------------------
The terminator modules terminate the control cable A lines. As
shipped, four terminator modules are installed in each drive,
terminating every line. However, each line must be terminated only
once.
Therefore:
- In srat (radial) systems, leave the terminator modules in all
drives.
- In daisy-chain systems, remove the terminator modules from all
drives except the drive at the end of the daisy-chain.
Share and Enjoy
Bookmark this story so others can enjoy it:
Tags
hard drive, hdd, hard disc, DK514S-38D, 330MB, 5.25
