Hard Drive: CONNER: CP-5500 510MB 5.25"/HH SCSI2 SE

C P - 5 5 0 0    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 5.25"/HH              Cylinders    2034|     |     |
Capacity form/unform   510/      MB        Heads          10|     |     |
Seek time   / track  12.0/ 3.0 ms          Sector/track   49|     |     |
Controller           SCSI2 SINGLE-ENDED    Precompensation 65535
Cache/Buffer           256 KB              Landing Zone     2033
Data transfer rate    2.500 MB/S int       Bytes/Sector      512
                      5.000 MB/S ext SYNC
Recording method     RLL                            operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         8 80    |      8 80
       standby            W     Altitude    km    -0.061  3.050|        12.200
       idle          13.9 W     Shock        g         5       |     50
       seek          13.9 W     Rotation   RPM      4498
       read/write    12.0 W     Acoustic   dBA        40
       spin-up            W     ECC        Bit
                                MTBF         h     150000
                                Warranty Month
Lift/Lock/Park     YES          Certificates

Layout

CONNER CP5500 CHINOOK SERIES PRODUCT MANUAL REV. 1, NOVEMBER 1991

  +---------------------------------------------------------+
  |                                         E4+++++E1       |
  |                                           +++++       ++|XX
  | +--------+                                            |||XX 50-pin
  | +--------+                                            |||XX SCSI
  |                                             Terminators||XX
  |                                                       |||XX
  |                                                       ++|XX
  |                                                       |||XX
  |                                                       |||XX
  |                                                       |||XX
  | Spindle Sync                                          |||XX
  | LED                                                   ++|XX1
  |+-+                                                      |
  || |                                                      |XX
  || |                                          +---------+ |XX Power
  |+-+                                          +---------+ |  1
  +---------------------------------------------------------+

Jumpers

CONNER CP5500 CHINOOK SERIES PRODUCT MANUAL REV. 1, NOVEMBER 1991

Jumper Setting
==============

There are three jumpers available for configuration of SCSI ID: E1,
E2, and E3.

 E1/E2/E3 SCSI ID
 ----------------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          |   E3  |   E2  |   E1  |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   |    1     | OPEN  | OPEN  | CLOSED|
   |    2     | OPEN  | CLOSED| OPEN  |
   |    3     | OPEN  | CLOSED| CLOSED|
   |    4     | CLOSED| OPEN  | OPEN  |
   |    5     | CLOSED| OPEN  | CLOSED|
   |    6     | CLOSED| CLOSED| OPEN  |
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+

NOTE
SCSI Parity out is always enabled.

Jumper E4 disables SCSI Parity in.