Hard Drive: CONNER: CP-340 42MB 3.5"/HH SCSI1 SE

C P - 3 4 0    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/HH               Cylinders     788|     |     |
Capacity form/unform    42/      MB        Heads           4|     |     |
Seek time   / track  29.0/10.0 ms          Sector/track   26|     |     |
Controller           SCSI1 SINGLE-ENDED    Precompensation
Cache/Buffer             1 KB              Landing Zone
Data transfer rate    1.000 MB/S int       Bytes/Sector      512
                            MB/S ext
Recording method     RLL 2/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         8 80    |      8 80
       standby            W     Altitude    km    -0.061  3.048|        12.192
       idle               W     Shock        g         5       |     75
       seek               W     Rotation   RPM      3600
       read/write         W     Acoustic   dBA        40
       spin-up            W     ECC        Bit
                                MTBF         h      20000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

CONNER CP340 CUSTOMER OPTIONS

  +-------------------------------------------------------+
  |+-+J1                              **E1             ++ |XX
  || |HDA                             **E2             || |XX SCSI
  || |                                **E3             || |XX I
  || |                                **E4             ++ |XX N
  || |                                                 ++ |XX T  J2
  |+-+                                    TERMINATORS  || |XX E
  |                                                    || |XX R
  |                                                    ++ |XX F
  |                                                    ++ |XX A
  |                                                    || |XX C
  |                                                    || |XX E
  |                                                    ++ |XX
  |1-+                                                    |XX1
  || |                                                    |
  || |J4                                                  |XX Power J3
  |+-+                                                    |XX
  +-------------------------------------------------------+  1

Jumpers

CONNER CP340 CUSTOMER OPTIONS

Jumper Setting
==============

There are four jumpers available for configuration; three of the
jumpers, E2, E3, and E4 are used to select the drive's SCSI ID, while
E1 (installed) disables parity.

 E2/E3/E4 SCSI ID
 ----------------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          |   E4  |   E3  |   E2  |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   |    1     | OPEN  | OPEN  | CLOSED|
   |    2     | OPEN  | CLOSED| OPEN  |
   |    3     | OPEN  | CLOSED| CLOSED|
   |    4     | CLOSED| OPEN  | OPEN  |
   |    5     | CLOSED| OPEN  | CLOSED|
   |    6     | CLOSED| CLOSED| OPEN  |
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+

 J4 Factory Test
 ---------------
 SIGNAL  PIN NO.
 +5V        1
 LED/SYNC   2
 UNUSED    3-14

Install

CONNER CP340 CUSTOMER OPTIONS

Mounting Holes
--------------
Side: 6-32 UNC-2B .12 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion

 J3   DC Power and pin connector assignments
 -------------------------------------------
 +-----------------------
 | +------------+ +----   pin 1  +12V
 | | 1  2  3  4 | | 1     pin 2   GND
 | +------------+ +--     pin 3   GND
 +------------------      pin 4   +5V