Hard Drive: CONNER: CP-3200F 212MB 3.5"/HH SCSI1 SE

C P - 3 2 0 0 F    CONNER
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/HH               Cylinders    1366|     |     |
Capacity form/unform   212/      MB        Heads           8|     |     |
Seek time   / track  16.0/ 5.0 ms          Sector/track   38|     |     |
Controller           SCSI1 SINGLE-ENDED    Precompensation
Cache/Buffer            64 KB              Landing Zone
Data transfer rate    1.500 MB/S int       Bytes/Sector      512
                      5.000 MB/S ext SYNC
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 60
Power: sleep              W     Humidity     %         8 80    |      8 80
       standby            W     Altitude    km    -0.061  3.050|        12.200
       idle           4.2 W     Shock        g         5       |     50
       seek           6.3 W     Rotation   RPM      3485
       read/write     6.0 W     Acoustic   dBA        40
       spin-up            W     ECC        Bit
                                MTBF         h     150000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

CONNER CP3200F CUSTOMER OPTIONS

  +-------------------------------------------------------+
  |1-+J1                                               ++ |XX
  || | Serial                                          || |XX SCSI
  || | IN/OUT         +-+E3                            || |XX I
  || |                | |E2                            ++ |XX N
  || |                +-+E1                            ++ |XX T  J2
  |+-+                                    TERMINATORS  || |XX E
  |                                                    || |XX R
  |                                                    ++ |XX F
  |                                                    ++ |XX A
  |                                                    || |XX C
  |                                                    || |XX E
  |                                                    ++ |XX
  |                                                       |XX1
  |                                                       |
  | +-J3--HDA--+                                          |XX Power J4
  | +----------+                                          |XX
  +-------------------------------------------------------+  1

Jumpers

CONNER CP3200F CUSTOMER OPTIONS

Jumper setting
--------------

 SCSI ID Jumpers
 ---------------
  +--------------+----------+--------+--------+
  | Drive Select |   E1     |  E2    |  E3    |
  +--------------+----------+--------+--------+
  |     0        |  OPEN    | OPEN   | OPEN   |
  |     1        |  CLOSED  | OPEN   | OPEN   |
  |     2        |  OPEN    | CLOSED | OPEN   |
  |     3        |  CLOSED  | CLOSED | OPEN   |
  |     4        |  OPEN    | OPEN   | CLOSED |
  |     5        |  CLOSED  | OPEN   | CLOSED |
  |     6        |  OPEN    | CLOSED | CLOSED |
  |     7        |  CLOSED  | CLOSED | CLOSED |
  +--------------+----------+--------+--------+
  There are three jumpers available for configuration. E1, E2, and E3
  are used to select the drive's SCSI ID.
  Note: SCSI parity is always enabled.

Parity
------
PARITY IS ALWAYS ENABLED! Do not connect the drive to systems which
use Parity Disabled!

 J4  Power
 ---------
      +---------+
      | 1 2 3 4 |
      +-+-+-+-+-+
        | | | +----------- + 5V
        | | +------------- GND
        | +--------------- GND
        +----------------- + 12V

Install

CONNER CP3200F CUSTOMER OPTIONS

Mounting Holes
--------------
Side: 6-32 UNC-2B .15 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion