 |
 |
Articles / TULARC / PC info / Hard Disk/Floppy Controller / E-H / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
MCS-700 Hard Disk/Floppy Controller Settings and Configuration |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
FUTURE DOMAIN CORPORATION
MCS-700
|
|
Data bus: 16-bit, MCA
Size: Full-length card
Hard drives supported: Up to six SCSI devices
Floppy drives supported: None
Sector interleave: 1:1
|
CONNECTIONS | |
|
50-pin SCSI connector-external |
J1 |
|
50-pin SCSI connector-internal |
J2 |
|
4-pin connector-DC power (Solder Mount version only) |
J3 |
|
USER CONFIGURABLE SETTINGS | ||
|
Function |
Location |
Setting |
|
Termination power supplied to bus |
W1 |
closed |
|
Termination power not supplied to bus |
W1 |
open |
|
Termination enabled |
W2/jumpers 1-4 |
closed |
|
Termination disabled |
W2/jumpers 1-4 |
open |
|
MISCELLANEOUS TECHNICAL NOTES |
|
All configurations are done through the firmware. JP2 is not present on the Surface Mount version |
|
|
|
|
 |
|