 |
 |
Articles / TULARC / PC info / Hard Disk/Floppy Controller / A-B / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
BT-746C/BT-747C Hard Disk/Floppy Controller Settings and Configuration |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
BUSLOGIC, INC.
BT-746C/BT-747C
|
| |
|
Data bus: |
32-bit, EISA-bus |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Up to seven SCSI devices |
|
Floppy drives supported: |
360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - Drive activity LED |
J1 |
|
34-pin connector Floppy drive interface |
J2 |
|
50-pin connector - Internal SCSI interface |
J3 |
|
50-pin connector - External SCSI-2 interface |
J4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive installed |
W1 |
Closed |
|
Floppy drive not installed |
W1 |
Open | |
|
MISCELLANEOUS TECHNICAL NOTE |
|
Note: The BT-746C is similar to the BT-747C with the exception that the BT-746C has no floppy connector |
|
|
|
|
 |
|