 |
 |
Articles / TULARC / PC info / Hard Disk/Floppy Controller / A-B / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
AC-1070, AC-1075 Hard Disk/Floppy Controller Settings and Configuration |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
ARCO COMPUTER PRODUCTS
AC-1070, AC-1075
|
Processor |
Unidentified |
|
Data Bus |
MCA |
|
Card Size |
Half-length, half-height card |
|
Hard Drives supported |
Two IDE (AT) drives |
|
Floppy drives supported |
None |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
40-pin IDE(AT) connector |
J1 |
2-pin connector - primary drive active LED |
W4 |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The AC-1070 is installed in any Micro channel slot and can coexist with any IBM hard drives or adapters. The AC-1075 fits into the IBM drive adapter slot of PS/2 models 50 and 50Z and, when used with an IDE drive, it replaces the IBM drive and adapter. |
|
|
|
|
 |
|