 |
 |
Articles / TULARC / PC info / Hard Disk/Floppy Controller / A-B / |  |
|
|
||||
|
|
|||
|
|
|||
|
||||
|
|
||||
|
   |
|
||
|
40MB INTERFACE CARD Hard Disk/Floppy Controller Settings and Configuration |
|
||
|
||||
|
|
|
||
|
||||
|
|
|
|
||
|
||
|
|
|
|
||
|
|
||
|
||
|
|
|
|
||
|
||
ARCHIVE CORPORATION
40MB INTERFACE CARD
|
Card Type |
Tape Drive/Floppy Drive adapter card |
|
Tape/Floppy drives supported |
Unidentified |
|
Data Bus |
8-bit ISA |
|
Card Size |
Three-quarter length, half-height card |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
Fuse (1.0 Amp; +5 Volt DC) |
F1 |
External Tape interface connector |
J5 |
|
Fuse (2.0 Amp; +12 Volt DC) |
F2 |
Internal Tape interface connector |
J6 |
|
DC Power connector |
J2 |
XT Floppy interface connector |
J7 |
|
AT Floppy interface connector |
J3 |
Resistor network |
RN1 |
|
Controller interface connector |
J4 | ||
|
BASE I/O ADDRESS SELECTION | ||
|
Setting |
JP1 | |
| » |
3F2h |
Pins 2 & 3 closed |
|
370h |
Pins 1 & 2 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Adapter intended to be used with Archive Corporation tape drives (internal model 5540 and external model 3540C). |
|
|
|
|
 |
|