FIRE GL 1000 video card Settings and Configuration
DIAMOND MULTIMEDIA SYSTEMS, INC.
FIRE GL 1000
Card Type | Graphics adapter |
Video Chip Set | 3Dlabs |
Maximum Video Memory | 8MB SGRAM |
Video Types Supported | VGA, XVGA |
Highest Resolution Supported | 1280 x 1024 |
Data Bus | 32-bit PCI |
CONNECTIONS | |||
Function | Label | Function | Label |
15-pin analog video port | CN1 | Header connector to daughterboard | J2 |
Header connector to daughterboard | J1 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Windows compatibility enabled | JP1 | Pins 1 & 2 closed |
Windows compatibility disabled | JP1 | Pins 2 & 3 closed | |
| » | On-board VGA enabled | JP2 | Pins 1 & 2 closed |
On-board VGA disabled | JP2 | Pins 2 & 3 closed | |
MEMORY CONFIGURATION |
The Fire GL 1000 has 4MB of SGRAM (synchronous graphics memory) installed. This can be upgraded with a memory Upgrade module containing another 4MB of SGRAM. The upgrade module is installed piggyback onto the Fire GL 1000 board. |
Upgrade module
CONNECTIONS | |||
Function | Label | Function | Label |
Header connector to mainboard | J1 | Header connector to mainboard | J2 |
My Books
