Description

This article is from the Apple II Csa2 FAQ, by Jeff Hurlburt with numerous contributions by others.

03.004 Is there a way of disabling Transwarp for games?

    Press <Esc> at power-up will disable Transwarp completely until the next power
off/on cycle.

A better way is to write a 01 to $C074.  This will slow Transwarp down to 1 MHz
without disabling it completely.  Writing a 00 to $C074 will restore Transwarp
to it's 'fast' speed.

By:  Rubywand
    

 

Continue to:

• prev: 03.003 How do I set up a Transwarp on my IIe?
• Index
• next: 03.005 I recently bought an "M-c-T SpeeDemon" board. It's dated 1984 and draws a small apple on the screen after power-up. What kind of cache RAM does it have? There's a place for jumpers near the top of the card. Is there a way to control this thing through software or hardware?

Share and Enjoy

Tags

pc, hardware, Apple II, Apple ][ or Apple //, apple, programming